ULTRAPLAN FAST TRACK

Ultra-fast drying self-levelling compound for thicknesses from 1 to 10 mm. It is suitable for restoring resilient floor which have to be ready for use in quick times.
TECHNICAL DATA:
Consistency: fine powder.
Where to use: internal floors, for resilient and wooden coatings.
Pot life: 10-15 minutes.
Thickness applied: 1-10 mm.
Set to light foot traffic: 1 hour.
Waiting tile before bonding flooring: 2 hours (resilients).
Application: trowel or rake.
EMICODE: EC1 R Plus - very low emission.
Colour: grey.
Storage: 12 months.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 20 kg bags.

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content.
Applications:
Interior levelling of new and existing substrates, as long as not subject to moisture, to make them suitable for receiving all types of flooring where high resistance to loads and traffic is required. Levelling existing floors provided they are solid, dry and clean.
Ultraplan Eco is applied up to 10 mm thick per layer by trowel or pump.
For the installation of wooden floors the minimum thickness must be 3 mm.
Technical data:
Pot life: 20-30 minutes.
Application thickness: from 1 to 10 mm.
Set to light foot traffic: approximately 3 hours.
Waiting time before installation: 12 hours.
Colour: pinkish grey.
Application: trowel, squeegee, or pump.
Storage: 12 months.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
20 kg bags.

ULTRAPLAN

Ultra-fast hardening self-levelling smoothing compound with very low VOC content.
Applications:
Interior levelling of new and existing substrates, as long as not subject to moisture, to make them suitable for receiving all types of flooring where high resistance to loads and traffic is required. Levelling existing floors provided they are solid, dry and clean.
Ultraplan  is applied up to 15 mm thick per layer by trowel or pump.
For the installation of wooden floors the minimum thickness must be 3 mm.
Technical data:
Pot life: 20-30 minutes.
Application thickness: from 1 to 15 mm.
Set to light foot traffic: approximately 3 hours.
Waiting time before installation: 12 hours.
Colour: pinkish grey.
Application: trowel, squeegee, or pump.
Storage: 12 months.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
20 kg bags.

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications.
Applications:
Interior levelling of all types of substrates normally found in the building industry provided they are clean and not subject to moisture, such as concrete slabs and walls, masonry, renders and cementitious screeds, etc. Also suitable for existing floors and walls, natural stone and terrazzo floors. Suitable for repairing or levelling steps, edges of pillars, landings and arrises of floors, walls and soffits.
Especially recommended where the substrate must be put back into use within a short time. By mixing Nivorapid with Latex Plus in substitution to water, a highly deformable smoothing compound is obtained with excellent bonding strength also on surfaces in metal, old rubber floors, PVC, chipboard wood, parquet, linoleum, etc.
Technical data:
Pot life: 15 minutes.
Application thickness: from 1 to 20 mm.
Set to light foot traffic: approximately 2 hours.
Waiting time before installation: 4-6 hours.
Colour: grey.
Application: metal trowel.
Storage: 12 months.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
20 kg bags

UC LEVELLER

Fast hardening levelling smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping.
UC Leveller is used for levelling and smoothing of new or existing substrates and it readies them for receiving any type of textile flooring in areas where resistance to heavy loads and traffic is needed along with an especially smooth surface. 
UC Leveller can be used in interiors in thicknesses from 3 to 70 mm only. 
Application examples:
Smoothing concrete slabs and cement-based screeds.
Smoothing anhydrite screeds.
Smoothing for under-floor heating installations. 
Smoothing over existing ceramic tile, terrazzo, natural stone and magnesite floors. 
Technical Data:
Consistency: fine powder
Colour: Grey 
Setting time: 2-4 hours
Ready for traffic: 12 hours
Waiting time before installing flooring: 24 hours
Storage: 12 months
Packaging: 20kg bag

PLANIPREP™ SC

High-Performance, Fiber-Reinforced Skimcoating Compound

Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.

© 2018 by Top Shelf Flooring Accessories.

  • Facebook Social Icon
  • Instagram Social Icon
  • YouTube Social  Icon