ultraplan renovtion.png


Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application.
Where to use: internal floors for new or existing concrete, screeds, stone, terrazzo, ceramic tiles, old or new timber floors, floor boards, chipboard panels, plywood and parquetry.
Workability time: 30-40 minutes.
Thickness applied: from 3 to 40 mm.
Set to light foot traffic: approx. 4 - 6 hours.
Waiting time before laying: 1 - 3 days depending on thickness
Application: trowel 
EMICODE: EC1 R Plus - very low emission.

Green Star™:  very low VOC content (g/l) - contributes valuable points towards Green Star™ credits

Colour: Grey

Storage: 12 months.
Consumption: 1.8 kg/m² per mm of thickness.
Packaging: 20 kg bags.

latex plus.png


Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications.
Interior levelling of all types of substrates normally found in the building industry provided they are clean and not subject to moisture, such as concrete slabs and walls, masonry, renders and cementitious screeds, etc. Also suitable for existing floors and walls, natural stone and terrazzo floors. Suitable for repairing or levelling steps, edges of pillars, landings and arrises of floors, walls and soffits.
Especially recommended where the substrate must be put back into use within a short time. By mixing Nivorapid with Latex Plus in substitution to water, a highly deformable smoothing compound is obtained with excellent bonding strength also on surfaces in metal, old rubber floors, PVC, chipboard wood, parquet, linoleum, etc.
Technical data:
Pot life: 15 minutes.
Application thickness: from 1 to 20 mm.
Set to light foot traffic: approximately 2 hours.
Waiting time before installation: 4-6 hours.
Colour: grey.
Application: metal trowel.
Storage: 12 months.
1.6 kg/m2 per mm of thickness.
20 kg bags